Re: Re: Re: Tractor rollover

Posted by Mark on April 09, 2004 at 16:28:33 from (64.12.116.80):

In Reply to: Re: Re: Tractor rollover posted by jimbeck1st on April 09, 2004 at 07:19:19:

It was not meant in an inflamatory or derrogative way at all. Just a simple statement. There are alot of people that should not under any circumstances be around equipment. The manufactures aren't going to write a chart due the the 1000 different variables involved ie: tire size,attachment,wheel spacing, wide front,narrow front,ballast,operator weight,operator standing or sitting,loader installed etc......... You would need a 100 hp tractor just to carry the weight of the chart,and then that would have to be factored into the chart also.I will stand by what I said,if someone needs a chart to operate a tractor on a slope,they shouldn't be near one.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Re: Re: Tractor rollover Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]