Re: Tractor rollover

Posted by It's Easy! on April 08, 2004 at 14:06:25 from (24.218.168.188):

In Reply to: Tractor rollover posted by jimbeck1st on April 08, 2004 at 07:31:01:

1. Install tilt-meter per manufacturers inst.
2. Sit on tractor and observe meter.
3. Have helper jack one side of tractor until it tips over.
4. Subtract 1 degree from reading on meter.

P.S. Throw away all of your torque specs. The Universal Law Of Bolt Torque " 3/4 turn past stripped, then back off 1 full turn."
;>)

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Tractor rollover Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]