|
Tractor Talk Discussion Board |
Re: HELP - - Standard or Hydro Static Transmission
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by KEG on March 29, 2004 at 20:10:15 from (64.218.66.16):
In Reply to: HELP - - Standard or Hydro Static Transmission posted by Tracy, Marion, TX on March 29, 2004 at 14:27:25:
Here's a thought that might not apply!
I have a JD950 (1980 vintage) and the standard trans. requires you to be at a COMPLETE stop before shifting. I sure wish I could shift on the fly. If the JD990 allows on the fly shifting, i.e., shift while moving, the standard trans would be fine. Another thought is when using the front end loader. Seems the hydro would allow you better control for pushing into a load and not spinning tires or using the clutch. I find myself always in the wrong gear as I try to get a full bucket load. But then, I may not be as experienced as others on this list and they're probably reading thinking I'm just a real klutz at using my tractor! At least my good ol' Deere has held up real well to my abuse. Can't beat that with any type of transmission. :>) KEG
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
