Re: Unlevel front bucket

Posted by jls on March 25, 2004 at 21:02:05 from (152.163.253.66):

In Reply to: Unlevel front bucket posted by Kurt on March 25, 2004 at 18:36:19:

look for twisted frame mounts, I saw a pin lost out of a cylinder and the cylinder wedged back in the frame a couple of inches. loose bolts. If EVERYTHING is just like new sit it on concrete and spend several hours with a tape and straight edge. Only then use a much bigger loader, block the low side up and push down on the high side---no guarentees, you might end up welding a broken one!

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Unlevel front bucket Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]