Re: Siclebar knife section RR (?)

Posted by Sid on March 15, 2004 at 05:01:46 from (12.160.110.99):

In Reply to: Siclebar knife section RR (?) posted by Indydirtfarmer on March 15, 2004 at 03:32:52:

I have an old piece of rail road track lay on it side then put sickle on the bottom part of track so the "backbone" is on the edge, sections pointing down, smack it with a hammer and it shears the rivets, punch rivet out, put in new sections. I usually use section bolts, they work good for me. I think the little extra cosis offset by the time saved. I have also used a sickle tool to punch out the rivets without having to grind off the heads nad replace broken sections in machine.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Siclebar knife section RR (?) Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]