Re: 4020 hydraulic problem?

Posted by david val on March 13, 2004 at 06:45:31 from (80.230.188.76):

In Reply to: 4020 hydraulic problem? posted by Ray on March 13, 2004 at 03:49:42:

if you use the tractor remotes, they should work exactly the same in both direction. follow the hoses and make sure the plumbing is right, check carefully the male tips, make sure they are not under pressure when connected (you can push the ball against its spring). make sure the coupler is in all the way in when connecting and that the lever is locked at right angle to the coupler. make also sure that the float position is locked up at the scv levers. when everything works fine you can enable the float in the lift scv. in float the bucket stays on the ground under it's own wheight and follow ground contours.
david

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 4020 hydraulic problem? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]