model m john deere

Posted by jack kelly on March 08, 2004 at 05:48:39 from (206.150.162.127):

I got my model m started for the spring, I left it idle for 30 minutes while I finished putting the coversect back on. While tightening a bolt near the ignition switch I kept hitting the wires that go to the coil and light...The tractor shutoff and would not fire again. I could not see any broken wires coming out of the back of the switch although they were in bad condition. What can I do to get running again?...Thanks, Jack

Follow Ups:

• Re: model m john deere RAB 07:59:25 03/08/04 (0)

Post A Followup Name: E-Mail: Subject: Re: model m john deere Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]