|
Tractor Talk Discussion Board |
Re: Re: Re: Remote Hydraulic filter install?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Mark on March 02, 2004 at 09:15:24 from (199.46.199.233):
In Reply to: Re: Re: Remote Hydraulic filter install? posted by Rod M1 on March 01, 2004 at 10:23:07:
Naw man. The 2 lines down the side are high pressure output from the pump to the lift and fluid return to the sump from the lift. I know this because one of my tractors has a hydraulic filter buried in the bottom of the sump and it is in the return line and filters the fluid as the last thing done before the fluid enters the sump. Kinda stupid to filter after the fact, but not so stupid when you consider there is no pressure at that point. To answer your question about a high pressure filter, my Deere has 2 pressure systems. 1 the 2500 psig 24 gpm pressure line to operate all hydraulics. 2. The 150 psig system that circulates hydraulic fluid to the cooler in front of the radiator and back. The filter is in this line and it is a cartridge filter.....get this....with a 4" dia steel cover with a wall thickness of about .100 inch. can't emagine how thick that cover would have to be if it were in the 2500 psig high press line. I really don't know where to tell you to put it so that it is functional and convenient for installation....my philosophy is if it has one ok, if not I just change the fluid every year or two (depending on shedded/use/weather and all) and don't worry about it.....remember boom! Is it worth it? Mark Mark
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Trailering Your Tractor - by Curtis Von Fange. One of the fun things of summer and fall are the parades and tractor shows that go on across America. Many owners of tractors travel long distances to attend these shows and they usually take their restored iron along with them. Safe trailering practices and inspections will ensure that the event is a fun one. A good habit to develop when using a trailer is to give that �quick look over� before taking it on a trip. Before hooking up to it check the tongue for proper operation. The latche
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
