Tractor Talk Discussion Board |
Re: Lead fuel vs. unleaded fuel
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jed on February 26, 2004 at 10:17:21 from (66.212.143.210):
In Reply to: Lead fuel vs. unleaded fuel posted by Tom on February 25, 2004 at 10:49:27:
I have heard a lot of good comments and just thought I would add my 2 cents worth. For the last odd 20 years I have been involved with refineries and lab testing. In that time period we have dealt with both the lead issue in gasoline and the oil additives issues. We still do that work today. Pa. grade crude is still around. It comes out of Bradford , Pa., under the Brad Penn & Penn Champ labels. It used to be Witco and they sold Kendall. Heck Sunoco bought the brand name and moved it east. When they say Pa. grade crude it is simply a smoke screen. A lot of base oils sell on the "spot market".The basic oil formulations are the same, but oil is oil. They figure who to heck really cares. When you hear you get what you pay for, beleive it. Whether it's gasoline or oil it is blended to a specification usually just enough to meet the minimum testing requiements. When it comes to leaded gasoline a lot of the old engines ran on kero or some sort of middle distillate. Heck they used to dump the light and really heavy ends into the rivers to get rid of it. There was little if any control over product specs. What lead there was occured naturally and it was ever so little. To make a long story short the amount of lead needed is insignificant to matter. By adding a cup of racing fuel every year you get what you need for valves.
Follow Ups:
Home
| Forums
Today's Featured Article -
My Ford Golden Jubilee - by Troy Estes. This article is about my '53 Ford Jubilee and a story that starts with taking the tractor to my brother's Starter/Alternator Rebuilding shop for a wiring fix. The generator was shot as well as all the wiring. I dropped off the tractor expecting a transformation from a 6 volt to a 12 volt system utilizing the original generator housing, and a total rewiring of the whole tractor. The front end center pin bushing was worn also so I ask that they replace it if they had time. Well, that’s wha
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|