Re: Farmall 560

Posted by Richard Ralston on February 26, 2004 at 09:21:58 from (63.187.233.149):

In Reply to: Farmall 560 posted by Richard Ralston on February 24, 2004 at 15:57:55:

Thanks for the responses. I have a Ford 8N withe the wide frontend and a small loader but I bought a 3 point chipper that weighs about 900 lbs and the 8N is a little small for hauling the chipper around and I doubt it has enough horsepower to adaquetly power the chipper. The chipper is supposed to be able to chip a 8" log. The guy I bought it from paid about $6,500 for it and used it about 4 hours. I gave him $2500 for it and I thought it would be better than burning.
I looked at the 560 to replace the 8N. A used wide frontend is about $1000, loader about $1500.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall 560 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]