hydraulic filter condition gauge

Posted by Bruce on February 22, 2004 at 06:05:43 from (24.213.27.142):

My bobcat M600 is missing the hydraulic filter condition gauge. It appears that a small line runs from my filter housing up to the area where the gauge is suppose to be, the line is crimped and the gauge is missing. The line is only attached with a compression fitting, so I know there is no high pressure in it, however, when I found it loose and tightend it, my air in the hydraulics problem was solved. I think the gauge works off of vacuum from this line, but I am only guessing....Does anyone know how this systme works and where I can find a replacement gauge. I suppose bobcat sells them, have not check with them yet, but does anyone know of a supplier for this sort of stuff.

Thanks

Bruce

Follow Ups:

• Re: hydraulic filter condition gauge T_Bone 18:58:19 02/22/04 (0)
• Re: hydraulic filter condition gauge Bob 18:33:31 02/22/04 (0)
• Re: hydraulic filter condition gauge RickB 07:02:08 02/22/04 (0)

Post A Followup Name: E-Mail: Subject: Re: hydraulic filter condition gauge Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]