Re: Farmall H siezed Engine 1 cyclinder full of w

Posted by Richard on February 20, 2004 at 19:21:54 from (12.180.42.78):

In Reply to: Farmall H siezed Engine 1 cyclinder full of water posted by Mike Linderman on February 20, 2004 at 14:44:01:

Most Of the Time if full Of Water, You Will have to Disconnect That Rod from Crankshaft, & hopefully you can Turn Crank Away From Stuck Piston &Rod. Then Take Wood that Will fit Into Cylinder & tap. If on Bottom Of Throw, tap Up. I have Had Several Stuck, & Soaked For a week or two, & Always got Unstuck. Usually sleeves& Pistons Pitted & Rings Bad. Also With that Much Water,Some Valves Will Be Stuck Also. I Use Outboard Motor oil. Seems To Penitrate Good. Good Luck

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall H siezed Engine 1 cyclinder full of w Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]