Re: ford 3000 hyraulic pump problem?

Posted by GaRY-Miss on February 15, 2004 at 15:28:52 from (64.12.96.235):

In Reply to: ford 3000 hyraulic pump problem? posted by kj on February 15, 2004 at 10:27:57:

Buy a kit for the lift unit-Less than 20 bucks. Remove the cylinder from the lift cover. One od the bolts is under the remote cover. The problem should be in the unloader valve. You have one valve that is moved with the lift lever. The valve next to it is the unloader valve and it is sipposed to float free. It actually controls the lifting. Remove it and install a new O ring. The new O ring for the lift piston is in the kit, so, replace it also. The leather back up ring should be soaked in warm water so it will go on the piston. It's purpose is to keep the cylinder wiped clean. It goes on to the outside of the o Ring. Good luck.

Follow Ups:

• Re: Re: ford 3000 hyraulic pump problem? kj 17:19:24 02/15/04 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: ford 3000 hyraulic pump problem? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]