Earl In Illinois Help John Deere 70 Pistons

Posted by Old Joe on February 15, 2004 at 06:49:18 from (63.175.215.210):

I need the following demensions of a John Deere model 70 stock gas piston and a Model 70 stock all fuel piston?
1) Overall from top of piston to bottom of piston
2) Size of wrist pin hole
3) From center of wrist pin hole to top of piston
4) From center of wrist pin hole to top of top ring
5) From center of wrist pin hole to bottom of bottom oil ring
6)Any photos of these pistons would be very helpful
Thanks Again, Old Joe

Follow Ups:

• Re: Earl In Illinois Help John Deere 70 Pistons Bob-Wyo 20:34:40 02/15/04 (0)

Post A Followup Name: E-Mail: Subject: Re: Earl In Illinois Help John Deere 70 Pistons Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]