Re: ATF vs hydraulic fluid

Posted by paul on February 14, 2004 at 13:18:07 from (66.60.197.136):

In Reply to: ATF vs hydraulic fluid posted by Bruce on February 14, 2004 at 09:46:35:

I would follow the manufaturer directions. Well, in your case I would call the nearest dealer & find out exactly what the manufaturer directions are! :) And write it down on the page in your manual.

My combines run on ATF, and work real well. My 3 differet colored tractors work on various grades of hyd or trans/hydraulic oil. Each works well.

I'd be replacing a whole lot of very expensive parts if I substituted in either direction.

Both ATF & tran/hyd oil work well when used for the systems that are designed to use them. However, bad things happen if you decide to use the wrong oil for the wrong system. This is one place to trust the manufaturer & not make up your own rules.

--->Paul

Follow Ups:

• Re: Re: ATF vs hydraulic fluid Bruce 14:23:47 02/14/04 (1)
  • Re: Re: Re: ATF vs hydraulic fluid paul 09:23:33 02/15/04 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: ATF vs hydraulic fluid Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]