Re: ATF vs hydraulic fluid

Posted by Vern-MI on February 14, 2004 at 12:41:35 from (207.69.137.8):

In Reply to: ATF vs hydraulic fluid posted by Bruce on February 14, 2004 at 09:46:35:

ATF viscosity is equivalent to 10W oil. You have to be careful since some of the ATF has friction modifiers in it such as Boron and Phosphorus which may not be the best for your system. Some of the additives in ATF also attack oil seals if they are not made of the right compound especially the synthetic ATF oils. Some of the friction material adhesives which we tried were also affected by synthetic ATF.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: ATF vs hydraulic fluid Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]