IH 574 Running a Three point Wood Splitter

Posted by Wayne M Kittler on February 14, 2004 at 08:29:01 from (24.194.176.20):

My IH 574 gas is basically a motor on wheels that drives hydraulic pumps. I have a separate pump just for the loader.If I were to put a wood splitter on the back, what would I have to do to get a hydraulic pressure supply to the splitter directional valve, preferably without modifying any lines. Is this the same way I would run a hydraulic pump rake? How much would rpm matter?

Follow Ups:

• Re: IH 574 Running a Three point Wood Splitter PAMike 20:39:28 02/14/04 (0)

Post A Followup Name: E-Mail: Subject: Re: IH 574 Running a Three point Wood Splitter Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]