Re: Pull the Plug or Leave it?

Posted by Dan on February 07, 2004 at 19:51:19 from (68.219.15.74):

In Reply to: Pull the Plug or Leave it? posted by Dan on February 06, 2004 at 12:09:26:

Thank you to all who responded, good advice and
much wisdom.
I PB blasted the threads a number of times.
Then I ground down an old half inch extension
to fit the hole and hammered it in. Attached
a breaker bar and went to turn it out. No luck.
The inside corners of the plug turned up and
out. I think someone in the past just way
overtightened this thing.
I would like to mig weld an impact extension in to the recess. But I'm thinking my hands might be
shaking too bad to get a decent weld.
My neighbor said: "Go on, weld it! It ain't
gonna make but one bang!"

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Pull the Plug or Leave it? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]