Re: OT cast iron heating radiator question

Posted by John Humphrey Morocco IN. on February 04, 2004 at 06:28:44 from (12.30.83.63):

In Reply to: OT cast iron heating radiator question posted by rhudson on February 03, 2004 at 22:40:19:

Cast Iron radiators were used 4 ways;
Steam; gravity return
pressure supply/ vacuum return

Hot Water; one pipe system
two pipe system
When I was young ( 1940s and 1950s) I helped with pipefitting jobs, taking out cast iron radiators and installing baseboard radiation. We would move some of the radiators to the basement to provide heat down there. When Doing this, we would have to change the taps on the radiator. They all had 4 taps. We removed the plugs with an old pipe wrench and a hand sledge hammer.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: OT cast iron heating radiator question Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]