Re: OT cast iron heating radiator question

Posted by F.E. Bear on February 04, 2004 at 03:51:37 from (67.210.239.169):

In Reply to: OT cast iron heating radiator question posted by rhudson on February 03, 2004 at 22:40:19:

Cast iron radiators are held together by tie bolts well below and above the water inlet & outlets. The tie bolts do not come in contact with any water. The plug you mention should go directly into the water passage. If it has only one pipe into the radiator and a plug in the upper end, it was used as a steam radiator. It will be OK to remove the plug and use it.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: OT cast iron heating radiator question Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]