|
Tractor Talk Discussion Board |
Re: 9n missing and backfiring
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Tom in TN on February 02, 2004 at 06:42:18 from (64.12.96.236):
In Reply to: 9n missing and backfiring posted by henry d. slovacek on February 01, 2004 at 21:33:48:
Henry, I'm not familiar with the exhaust and intake manifolds on a 9N. I'm sure that some of the other guys on this forum are and will provide correction if my opinion is wrong. So, for what it's worth, here goes. The exhaust manifold should not be sucking air since it is exhaust, not intake. If it is leaking, it should be blowing exhaust gas out. Although this is not a good thing, it should not interfere with the operation of your engine, and certainly should not be causing backfires or misses. Backfiring and missing are indications that you are not getting spark at the spark plugs at the right time in the engine cycle. I think that your most productive plan of action would be to go over your ignition system. If you have not serviced the ignition system within the past year or so, I think that you should start by replacing the points, condenser, rotor, distributor cap, and spark plugs. If the spark plug wires haven't been replaced within the last couple of years, it would be a good investment to replace those too. Make sure that you get plug wires that for your tractor, not just generic plug wires. You should have honest to goodness copper wires, not carbon wires. And finally, when you're sure that the components of the ignition system are good, you should check and adjust the timing. I'd be very surprised if this doesn't fix your problem. If you are certain about the ignition system, but still have a problem, let us know, and we can go a little deeper in problem determination. Good luck, Tom
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|