Re: LP HEAD FOR A IH 560 FARMALL IS THERE A DIFFE

Posted by Heat Houser on January 30, 2004 at 15:16:11 from (69.66.106.177):

In Reply to: LP HEAD FOR A IH 560 FARMALL IS THERE A DIFFERENC posted by NATHAN on January 29, 2004 at 17:13:30:

Heads are the same, the difference between the two were the valves and seats were typically made out of Stellite since there wasn't any lead additive in the LP fuel. The difference in compression was a crown on the top of the pistons away from the valve side. As I recall, the gasser piston was flat. IH also made hi altitude pistons and I suspect that they were simply LP pistons running on Gasoline.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: LP HEAD FOR A IH 560 FARMALL IS THERE A DIFFE Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]