Re: When to weld vs bolt

Posted by T_Bone on January 27, 2004 at 14:34:29 from (171.75.11.17):

In Reply to: When to weld vs bolt posted by Ray on January 27, 2004 at 14:07:22:

Hi Ray,

It's very rare that you should choose bolting vs welding.

If you need to disassymble a part then you bolt it. If not then a weld is almost warranted every time. A weld is most cost effective and will hold better given time.

Use isolation pads from the genset to the frame. That will prevent most weld cracking problems along with a good engineering design.

T_Bone

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: When to weld vs bolt Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]