Re: Briggs Stratton Starting problem

Posted by J.D.GREENE on January 25, 2004 at 14:17:54 from (66.11.97.74):

In Reply to: Briggs Stratton Starting problem posted by Jim in PA on January 25, 2004 at 08:38:40:

Could be that your starter gear is not engaging the flywheel. If so free the gear up, (counter clockwise screwdown) and try the key again. If that's not it, some mowers have to have the seat down against a contact under the seat frame or there is a small plastic push switch for the pto that could have got fried, there is also a push switch for the inch-brake pedal that could of commited suicide. Most of these switches are very cheaply made but cost around $8.00. Hope this helps.........

Follow Ups:

• Re: Re: Briggs Stratton Starting problem Rusty Jones 16:48:56 01/27/04 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Briggs Stratton Starting problem Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]