Re: What part needs heat MOST?

Posted by buickanddeere on January 20, 2004 at 07:43:37 from (192.75.48.2):

In Reply to: What part needs heat MOST? posted by smark on January 19, 2004 at 14:55:42:

The combustion chamber ( head/piston) if too cold will absorb heat faster than heat is produced by air compression.
A hot intake manifold will give compression heat a "running start".
Oil has to be a winter weight synthetic or preheated mineral oil. As previously mentioned, oil the consistancy of cold corn syrup will not flow readily into the oil pump and out to bearings.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: What part needs heat MOST? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]