Re: Re: Spot Putty Question (tractor tin) ???

Posted by Rusty Jones on January 11, 2004 at 18:10:50 from (209.195.143.235):

In Reply to: Re: Spot Putty Question (tractor tin) ??? posted by jimbo on January 08, 2004 at 07:46:02:

NOTE: FROM AN OLDER AUTO BODY MAN---PLASTIC FILLER--SAND IT DOWN TO SHAPE, PRIME 3 COATS, ALLOW TO DRY THRU, SCUFF LIGHTLY WITH SCUFF PAD, APPLY SPOT PUTTY, ALLOW TO DRY, BLOCK SAND WHERE APPLICABLE, REPRIME, SAND SMOOTH, BLOW OUT CRACKS WITH HIGH PRESSURE AIR, WASH JOB WITH "PRE-KLEANO", A WASH TO REMOVE WAX, GREASE, FINGER AND HAND OILS, ALLOW TO DRY, APPLY COLOR COATS! RJ

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Spot Putty Question (tractor tin) ??? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]