Re: 1951 JD B wide front end assembly

Posted by Dennis on January 06, 2004 at 04:23:08 from (63.186.48.38):

In Reply to: 1951 JD B wide front end assembly posted by Craig Waldo on January 05, 2004 at 19:25:29:

Craig,

The correct "factory" wide front for your tractor will be a round cast iron assembly. The casting # on the round cast center would be B2690R. Do you have a split front pedestal? If so, the wide front assembly will bolt up with four bolts. If not, you will have to replace your one-piece front pedestal with the two-piece unit. The correct factory wide front for the regular row-crop Model B will have 17.75" knees/spindles (the wide front assembly for the BN and BW will have 19.75" knees/spindles). The round factory John Deere wide front assemblies are readily available in the $800.00 range (however that price will not include the split pedestal which might cost another $250.00).

Dennis

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 1951 JD B wide front end assembly Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]