Re: JB Weld

Posted by TO35 on December 21, 2003 at 03:34:16 from (209.86.139.121):

In Reply to: JB Weld posted by stan on December 21, 2003 at 00:36:57:

You should have no Problems with it provided its clean when you apply it and cured before you use it....I use it alot shaping the ports of intake and exhaust of methonanol kart racing engines and even patching holes in blocks....I wash off the area where I am going to use it with a non residue brake clean like one from wurth...but there are many that work ok...doesnt hurt to rough up that area with a dremel tool either....

best wishes
TO

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: JB Weld Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]