|
Tractor Talk Discussion Board |
Re: Re: Re: Re: tractor shows/ behavior
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Fritz on December 11, 2003 at 17:20:11 from (12.163.95.188):
In Reply to: Re: Re: Re: tractor shows/ behavior posted by doggie daddie on December 11, 2003 at 08:35:37:
I have a decent '48 Model M John Deere that my dad and I restored ourselves and a couple fair looking 140 John Deere garden tractors that I continue to work on. A couple years ago I took my M and the nicest 140 over to our local show. I didn't have any problems with the folks sitting on the M's front tires to take a break or having a dad ask if it was OK to climb on either one and have his child sit on this lap for a family photo. It didn't bother me when the kids would bounce on my spring steel parade seat that I had on my 140's 3 pt. Someone stole all my hitch pins off my clevis' and one of my little American flags that I had on the 140 - I wasn't going to worry about the little stuff and figured I'd learn better next year. I did have to draw the line when I watched someone slide their pop can down the length of the hood on my M and then leave it sitting there. I also lost my cool alittle when I watched a mother hold up her toddler so he could tap dance on the fiberglass hood of the garden tractor. I suppose I fall somewhere in the middle of this topic. But I have told my kids to ask first before touching someone elses stuff and would just appreciate it if others didn't abuse mine. I'll be at the show next year - but not too far away from them either.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let�s make one more addition to our series on hydraulics. I�ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|