Re: bore and stroking 1948 john deere model b.

Posted by Ron on December 05, 2003 at 16:40:13 from (64.12.96.236):

In Reply to: bore and stroking 1948 john deere model b. posted by leon on December 05, 2003 at 16:22:39:

If you really need that much power increase in a "B"..get a Power Block..!! NOT a Stroker..!!
You can only get the "B" Head to flow so much air and if you stroke it, it will only make Power at a lower RPM because of it...
The 5" Power Block will make a Large difference.!
And will take the breathing to the LIMIT...!!
The Design of a "B" is built around the rated RPM, and if that is changed (RPM Lowered), then the flywheel weight will have to be re-calculated to get the best out of it (NOT Balance, Inertia).
I imagine "B" axles are getting expensive now..??
Get some, you will be breaking a few...!!

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: bore and stroking 1948 john deere model b. Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]