Re: Installing Piston Sleeves

Posted by marlowe on December 02, 2003 at 06:03:12 from (209.103.223.97):

In Reply to: Installing Piston Sleeves posted by stan on December 02, 2003 at 01:14:47:

be very carfull because the sleeves are VERY thin and hard and will brake easy. DO NOT pound or you will bust them. get them cold [over night]and they will go in with a little pushing. clean up the bore in the block and move FAST. you have one shot at it or you will have to pull the sleeve and thats no fun. colder the better for sleeves warmer the better for the block. good luck

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Installing Piston Sleeves Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]