Re: Re: engine not firing on all cylinders

Posted by Kevin (FL) on November 17, 2003 at 14:06:54 from (12.76.73.87):

In Reply to: Re: engine not firing on all cylinders posted by Bob on November 17, 2003 at 13:32:58:

That engine will run with less than 100 PSI compression. I agree with Bob--replace the spark plug with a known good one and check firing order and also check the plug wires. I find carbon type plug wires installed on tractors all the time instead of the solid copper type. They will work but also have found they can cause misfiring or no firing of the plug. I use an inductive-type timing light to do a quick check and then replace any suspect wires that are intermittent firing.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: engine not firing on all cylinders Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]