Done Split the 350 Farmall !

Posted by Greasy John-Or on November 01, 2003 at 17:49:32 from (208.35.181.72):

Me again Fellows--well The Landfill 350 is in 2 parts tonite.My grateful Thanks to all who tried to help me. My special Thanks go to Peter at Wisconsin Tract.Parts.who has just bought out Paynesville tract as I understand it. I ordered the new PTO gear and shaft (used) (driven Gear)
but could get the case to split from the tranny
Pete sent me 8 sheets of info from the orginal IH manual with the advise to pull very hard I did and it finally busted loose.I built a (I) beamm jig from an old Trailer house tounge and a roller jig for the front half --I can push it back and forth and it stays in alignment.How can one put info in the archives for future users??? John
I have jpgs if anyone is interested in this whole operation.

Follow Ups:

• Re: Done Split the 350 Farmall ! RJ-AZ 17:57:17 11/01/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Done Split the 350 Farmall ! Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]