Re: Re: valves

Posted by Bob on October 27, 2003 at 20:07:38 from (66.163.134.177):

In Reply to: Re: valves posted by Allan on October 27, 2003 at 19:44:58:

The offset cam, rotating lifter scenario would only apply with a flathead, or overhead cam engine. If we are refering to a typical old tractor engine with rocker arms (and that, obviously, is only a guess), the rotation of the lifter on the cam would have nothing to do with the rotation of the valve.

Follow Ups:

• Re: Re: Re: valves Allan 20:10:14 10/27/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: valves Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]