Tractor Talk Discussion Board |
Re: Ether
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ludwig on October 27, 2003 at 10:38:50 from (65.196.0.78):
In Reply to: Ether posted by Allan on October 27, 2003 at 06:03:04:
One last thing to add in case somebody reads this all and gets thinking "Hey, the guys said ether is okay. If you've got a 2 stroke KEEP AWAY FROM THE STARTING FLUID! There ain't no dang lubrication in that stuff. I've seen guys start a snowmobile on ether and keep it running by shooting little bursts into the carb until the fuel pump caught up. I've seen snowmobile engine sieze right up doing that... Now this is not to say I haven't done it myself, some of those old single cylinder machines will rip your arm right off and a little ether makes the job alot easier but the first thing I do is shoot in a little PB blaster to lubricate things. The better way to do it is to get a can of premix and shoot that in so everything gets lubricated properly.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|