Re: Re: Re: Re: Heisler overdrive removal troubles

Posted by Carl Christensen on October 26, 2003 at 11:35:24 from (206.230.105.248):

In Reply to: Re: Re: Re: Heisler overdrive removal troubles, Fa posted by john d on October 26, 2003 at 11:14:04:

Thanks for the help. I'm on the bottom end of the "learning curve" as far as tractor stuff goes. I'd ideally like to remove this pto unit and replace it with the stock assembly. I'm not sure if this can be done without taking the top plate of the transfer case off or not ?? I have tried to pull the shaft support plate and seal from the left side so I can swap out the shaft, but it won't disengage from inside. I have all the parts to return it to a stock condition.

If it involves pulling the top plate, I'd like to find someone who would have a complete Heisler live pto cover so I can cover it up again.

Thanks ! Carl

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: Re: Heisler overdrive removal troubles Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]