Re: heating hyd oil

Posted by Mike on October 24, 2003 at 16:19:32 from (205.188.208.73):

In Reply to: heating hyd oil posted by T16 on October 23, 2003 at 21:01:18:

I wouldn't worry about the hydraulic heater. Trying to keep 30 gallons of oil warm just isn't going to happen. Probably 10-12 gallons of it is in cylinders,pumps lines and motors. Just plug in the block heater and when it starts let it run for 5-10 min. to warm up the oil. My 785 NH skid steer doesn't have a hyd. heater on it, just a block heater. It gets started every day to feed in North Dakota. Just make sure you have a good battery and keep the block heater plugged in all the time if you are going to use it daily.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: heating hyd oil Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]