Re: Do they make shorter mufflers?

Posted by DRL on October 13, 2003 at 06:32:03 from (65.117.208.148):

In Reply to: Do they make shorter mufflers? posted by Andrew Reinhart on October 13, 2003 at 04:42:03:

If you are good with a welder and have some kind of cut off saw, you could try cutting the 4 bolt flange off of the bottom of the muffler, cut whatever you need extra off of the muffler, and then weld the base back onto the now shorter muffler. I've never tried it, but it seems like it should work. I am assuming that you have the round stack, like the A's, 50's, ect. have and not the oval muffler. If it is the oval type, not sure if you could get enough clearance off of the hood to do this.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Do they make shorter mufflers? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]