|
Tractor Talk Discussion Board |
Re: DIESEL QUESTION
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by T_Bone on October 12, 2003 at 01:10:11 from (65.58.140.147):
In Reply to: DIESEL QUESTION posted by Allen on October 11, 2003 at 11:26:35:
Hi Allen, Lugging a diesel engine is where your running WOT without gaining RPM at peak torque design or at a higher RPM. "Lugging can occur at any RPM." If lugging happens below design peak torque very often, it will tear the bottom out of the engine (read as very expensive to repair). Read the Cummins engine website for the above explanation as I have not found another website that explains it better. Wet Stacking is where carbon deposits are formed under the valves and/or in the valve seats. This doesn't allow for the valve to seat correctly on each stroke. Wet stacking occurs at low RPM and multiplies rapidly when the engine is under a lite load. Depending on the engine design, most fuel efficency starts at 180* and peaks at 200* plus. My PSD, DI engine, does not like prolonged idleing. When in lo-range, empty, creeping the backcountry for several hours it will load the cylinders up and there is a distink engine power degrade. I then have to rap it up for a couple minutes and she blows black smoke something terrible. At peak torque pulling 16k GCW it does not smoke at all, well that you can see in the mirrors anyway. It's a diesel, it smokes! I also have a IDI diesel that can idle for 24hrs straight with out any signs of having any problems and it has 7500hrs on it. I use Type F, ATF mixed at 1qt/50gal #2D, for a in-engine injector cleaner. A time proven method of 50yrs plus. Injectors out of engine then I use Berryman B-12. You might also look for an fuel suction air leak. Take the fuel tank return line off into a clean bucket and if the fuel stream has air bubbles in it, you have a suction air leak somewhere. You can also use the fliter drain on some engines and run that into a bucket. A suction leak can occur on the pressure side as well as the vacumm side but will not drip fuel. Cover each fitting, one at a time, with a heavy oil while observing the fuel flow. If the bubbles stop, you found your suction leak. T_Bone
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|