Re: Ether starting fluid.

Posted by Ken on October 02, 2003 at 23:57:48 from (67.50.133.245):

In Reply to: Ether starting fluid. posted by Huw from west wales uk. on October 01, 2003 at 12:31:16:

It's best to stay away from ether. Whenever we had trouble with a diesel starting (warm or cold weather) we would use carb cleaner or penetrating oil by Loc-Tite. This equivelent to WD-40. But don't use to much or it will work against what your trying to do. Ether is hard on oil the rings need on the top end of the cylinder. We don't use it at all. The other's answers are good advice by keeping the batteries up and plug in those block heaters and use anti-gel in the fuel.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Ether starting fluid. Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]