Re: Farmall fluid levels?

Posted by Red Dave on October 01, 2003 at 06:05:53 from (24.104.94.34):

In Reply to: Farmall fluid levels? posted by Tom In Texas on September 30, 2003 at 16:58:10:

Gary-Miss has it right. That plug on top of the transmission is where you add oil to the transmission. The PTO shares oil with the transmission, but I always put a little directly in it so it doesn't start out with none at all. If I were you, I would check the oil, before you add any, for moisture. If it is milky colored, I would drain it and replace it entirely. It doesn't need a lot, something like 5 or 6 quarts is what comes to mind here, but check the level plug as you fill, my B takes about 1/2 quart less than the manual calls for.
I use 90 wt or 80w-140 gear oil in my B for transmission and final drives.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall fluid levels? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]