|
Tractor Talk Discussion Board |
Re: Re: rust
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ol Chief on September 29, 2003 at 22:06:24 from (63.246.186.23):
In Reply to: Re: rust posted by Stan TN on September 29, 2003 at 16:40:10:
In the marine industry (Ospho) tradename is widely used prior to primer paint.This product is a rust converter.I am told by One of their distributers that ospho contains 76 percent Phosphoric acid plus some buffers.This material stops rust by converting iron oxide to iron phosphate.In past on seagoing ships I have seen thousands of gallons of this stuff used over a period of years.White works on ships are very difficult to maintain due to rust stain bleeding thru the paint.If a 50 percent water mix is used it will remove all chalk like deposits along with stainsand provides a skin that prevents further bleeding .Often seen this hold from several days to weeks.I use it on my old tractors just to see where the paint stops and the rust begins.It is for use on surface rust,not heavy scale.However small scaled pieces will be descaled if submerged in the solution for a timebut be careful not to leave parts to long or they may be reduced.I suggest after water rinse, to rinse again in a mild solution of water and baking soda to neutralize any thing left in the pores of the metal.That is not necessary if you are just coating in way of painting large surfaces.I am in Texas and can find Ospho at the hardwear store For $17.00 Per gallon.There are other similar products around.Coroseal is a different type product and hard to find.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
History of the Field Marshall Tractor - by Anthony West. Any restorer who has some knowledge of turn of the century farm machinery, will recognize the name Lanz Bulldog!! This machine was to say the least unusual in its appearance. The huge flywheel and coffee percolator shaped exhaust. Along with square body lines and cylinder head protruding forward of the front axle. Would become the visual differentiation that people would quote to separate the Lanz from other period machines. The Marshall company based at the Briannia Works in Gainsborough
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|