12 volt convert

Posted by need help on September 16, 2003 at 15:16:50 from (216.74.195.177):

I am converting a Ford 800 and JD 620 to 12 volt. (I know, shame-shame)any way, I need help with the wiring. On both tractors I have got the #1 wire jumped to the big post and then going to the amp guage then on to the battery. Then the #2 or "F" goes where? I have tried different places on the switch and still get nothing in the way of a charge. The alts. are good. I have had a few people tell me that I need a small light bulb or some kind of pressure switch in circut to open the alt. Is this true or what am I not doing right. Any help or preferably a drawing PLEASE!

Follow Ups:

• Re: 12 volt convert jake 07:50:03 09/17/03 (0)
• Re: 12 volt convert Jon H 17:01:47 09/16/03 (0)

Post A Followup Name: E-Mail: Subject: Re: 12 volt convert Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]