|
Tractor Talk Discussion Board |
Re: Re: Re: Re: Re: Re: New Belarus tractors - tir
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by RAB on August 05, 2003 at 11:18:55 from (195.93.50.8):
In Reply to: Re: Re: Re: Re: Re: New Belarus tractors - tire pr posted by Rod F. on August 04, 2003 at 21:14:17:
Rod,
Thanks for your comments but:
If you do practical work with metric you would know THAT metric bolt will not be a 15 or 17 mm!!
The system uses preferred values (just like electrical resistors)14,16,19mm. The threads are also of standard pitches and depths.
The Furlong - the distance a pair of oxen could pull a plough before getting tired (and needing a turn). Good old fashioned variable measure!
Check up for NASA's excuse for losing that probe.
Multiply your spray rates by 2.4. You will probably find they all work out to integer values.
Do you spread fertiliser using kilograms per 4840 square yards, or kilograms per hectare?
And don't forget, of course, a gallon is not always a gallon depending on where you are.
Even the British Government realised in the sixties that decimalisation of our currency was needed, but even though everywhere in the UK should by now have adopted the kilogram as a unit
of weight, there are many who can not bear to let go of that silly lb. or are unable to grasp the advantages of a unified metric system. Or simply are not willing to change.
Regards, RAB
Oh, btw we will still be left with the computer having 1024 bytes per kilobyte (hexadecimal)!!
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
