Follow-up to :? about aux. hyd. on 1850 Oliver

Posted by Chris-se-ILL on July 18, 2003 at 09:38:50 from (216.174.170.224):

Rick, and all those that gave advice about hooking an auxiliary valve system to an Oliver 1850 (I posted the question about 1 week ago). I finally had time to go back and work on the tractor and I found my error. The aux. valve system WAS set up as a closed system and thus the oil would not circulate when the 3/8ths plug was inserted in the passage (I did have the return line hooked up, but with the closed system the oil would not return).

I replaced the "closed system" plug in the aux. valve body with an "open system" plug and now the valves work fine!

Thanks for the info and assistance!

Chris

Follow Ups:

• Re: Follow-up to :? about aux. hyd. on 1850 Oliver Rick 19:44:23 07/18/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Follow-up to :? about aux. hyd. on 1850 Oliver Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]