Re: w d

Posted by Ron on July 15, 2003 at 20:47:36 from (64.12.96.236):

In Reply to: w d posted by steve on July 15, 2003 at 03:07:09:

Well, for one thing, DON'T have the valve body set for weight transfer, if it won't go in any deeper.....!!
I set mine for weight transfer, but mine goes in real good..!!
Look at the point, and determine if it is worn....
If so, have it built up with Hard-Facing...
The angle of the point, and wheather it is worn will make a great difference in how well it "Sucks down"....!! You have to have some, but not TOO much...!!

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: w d Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]