Re: removing sleeves from AC

Posted by Chevy Man on June 12, 2003 at 15:52:54 from (209.151.185.200):

In Reply to: removing sleeves from AC posted by Dave Banker on June 11, 2003 at 20:16:52:

to remove the sleeves: first remove the pistons
and the connecting rods. After this is done,
aquire a suitable puller and pull the sleeves from
the block. when replacing the sleeves, make sure
there is no dirt or foriegn objects in the sealing
area. Also make sure the sleeve does not extend
any further than between .002-.004 above the
block. If the sleeve extends any further than
.004 water will leak through the head gasket. Use
vasaline to lubricate the two seals to ensure the
sleave will fit properly.
BEEN THERE DONE THAT! hope this helps and you get
your dads tractor together before he gets back. If
you have any further questions, feel free to
E-mail me at "dirtdr_5

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: removing sleeves from AC Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]