Re: INTERNATIONAL HARVESTER 574 w frnt end loader.

Posted by Kraig on May 25, 2003 at 20:25:46 from (140.233.83.52):

In Reply to: INTERNATIONAL HARVESTER 574 w frnt end loader. posted by j.goodman on May 24, 2003 at 23:11:54:

I did one of those clutches, it was a real easy
tractor to split. Block the rear wheels, put
wedges between the front axle and the frame
so it won't tilt, put a floor jack under the motor
with some blocks. I can't remember exactly
how I did it I think I put a 2x6 between the oil
pan and the floor jack. If u don't have a decent
floor put a plate of steel under the jack long
enought to roll it apart on it. As for an
alighnment tool when I asked the guy who
puts alot of them in he said just eye ball it, I
did and it worked. Just be sure it goes all the
way together before u put the bolts in, ( don't
draw it together. For a manual get a central
tractor catalog an order an I&T manual, they
are inexpensive and have good info.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: INTERNATIONAL HARVESTER 574 w frnt end loader. Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]