Re: over the shaft pto coupler

Posted by Farmer in the Dells (WI) on May 24, 2003 at 15:41:40 from (66.187.42.35):

In Reply to: over the shaft pto coupler posted by darren on May 24, 2003 at 13:37:32:

You were not real clear what you mean by turning and not catching. If you mean your PTO shaft is smaller than the implement you are trying to run, there is a solution. There is an adapter that when placed on the smaller PTO shafts will increase the diameter to match the larger drive shafts. I can tell you for my Allis Chalmers B it has a small shaft and my adapter lets me run the larger drive shaft implements. Keep in mind the horsepower requirements of the implement and the lack of power in some of the smaller shafted tractors. You won't want to put too much stress on the tractor by running more than it was designed or capable of. Just my 2c and keep the change.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: over the shaft pto coupler Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]