Re: Farmall H won't start

Posted by RAB on May 05, 2003 at 13:34:10 from (195.93.50.7):

In Reply to: Farmall H won't start posted by 1370 on May 05, 2003 at 13:01:53:

If changing manifold has created the problem, it is possibly :
1) leaking air into manifold - did you change the gaskets? tighten the manifold bolts/clamps evenly and in the proper sequence? a warped manifold?
2) muck, rust or etc stirred up when carburettor removed? Blocked jet? debris blocking the float valve?

You don't say why you changed the manifold in the first place, so carb settings may need altering to get it starting easier.

Carb settings are adjusted with engine at operating temperature, adjust main mixture control, then to idle setting and slow running adjustment, setting at best running position in each case. Cycle round again to check settings haven't changed and when all is done, try it.
Regards, RAB

Follow Ups:

• Re: Re: Farmall H won't start wdTom 17:06:52 05/05/03 (1)
  • Re: Re: Re: Farmall H won't start Bill 18:15:20 05/05/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall H won't start Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]